Parlec DA300-0234 Double Angle Collet DA300 15/64 in

Product Description

The PARLEC DA300-0234 is a Double Angle collet in the DA300 series, designed for secure tool holding in CNC machining centers and milling applications. It accepts round shank tooling with a collet capacity range of 0.2188 to 0.2344 decimal inches, making it suited for 15/64 inch shank cutters, drills, and end mills. The overall length is 1 inch and the overall diameter is 0.375 inches. Machining professionals and tool crib technicians install this collet as part of a DA300 collet chuck assembly to achieve accurate, repeatable tool runout and consistent grip force during cutting operations.

This collet is used in production and job-shop environments where DA300 series collet chucks are installed on vertical or horizontal machining centers. It is suited for light to medium milling, drilling, and reaming operations where a secure, concentric tool hold is required. The 15/64 inch bore accommodates standard round shank tooling at that diameter. Facilities running high-mix, low-volume work will find this collet a standard replacement or additional spare for existing DA300 chuck setups.

Key Features

• DA300 collet series with 15/64 inch bore for direct shank tooling fitment
• Collet capacity range: 0.2188 to 0.2344 decimal inches
• Overall length of 1 inch for compact tool assembly
• Overall diameter of 0.375 inches for proper chuck seating
• Double angle design provides even clamping force distribution across the shank

Compatibility

Designed for use with DA300 series collet chucks. Compatible with tooling featuring a 15/64 inch round shank diameter. Verify chuck series compatibility before installation.

Installation Notes

Installation is performed by machinists or toolroom technicians. Power down and lock out the machine spindle before inserting or removing collets from the chuck body. Inspect the collet bore and chuck taper for debris, wear, or damage prior to seating. Do not exceed the stated collet capacity range, as oversizing or undersizing the shank relative to the collet bore reduces grip accuracy and can cause tool pullout.