Parker V402P-2-2 Drain Cock Shutoff Valve 1/8 Inch

Product Description

The PARKER V402P-2-2 is a brass drain cock shutoff valve designed for small-bore piping applications requiring a reliable manual shutoff or drain point. Featuring a 1/8-27 NPTF thread on both the female pipe inlet and male pipe outlet, this valve provides a pressure-rated inline drain or isolation point rated to 30 psi maximum working pressure. The all-brass body resists corrosion in typical plumbing and light industrial service environments. Licensed plumbers and HVAC technicians commonly install this valve where a low-flow drain cock is needed on condensate lines, compressed air headers, or small-diameter water lines.

This drain cock shutoff valve is suited for residential and light commercial plumbing, HVAC condensate drainage, and compressed air or fluid system drain points wherever a 1/8-inch NPTF connection is present. Its compact form factor fits tight installations common in equipment rooms, utility closets, and mechanical chases. The female-to-male pipe configuration allows direct inline installation without additional fittings in most standard 1/8-inch pipe runs.

Key Features

• 1/8-27 NPTF thread on both inlet and outlet for secure, leak-resistant connections
• 30 psi maximum working pressure rating
• All-brass body construction for corrosion resistance in plumbing and HVAC service
• Female pipe to male pipe configuration for straightforward inline installation
• Minimum working temperature of 32 degrees F
• Compact design suitable for tight mechanical spaces

Compatibility

Designed as an OEM-style replacement or new-installation drain cock for 1/8-inch NPTF pipe systems in residential and light commercial plumbing, HVAC, and compressed air applications.

Installation Notes

Installation should be performed by a licensed plumber or qualified HVAC technician in accordance with applicable IPC and local mechanical codes. Depressurize and drain the system fully before removing or installing any drain cock. Apply thread sealant or PTFE tape to NPTF threads as required by local code and manufacturer practice. Do not exceed the 30 psi maximum working pressure rating for this valve.