Parker SDV-10410-1 Hydraulic Vane Pump 4 Gpm

Product Description

The PARKER SDV-10410-1 is a hydraulic vane pump designed to move pressurized hydraulic fluid in industrial and mobile hydraulic systems. It operates at a rated speed of 1200 RPM and delivers 4 gallons per minute (GPM) at 1800 RPM. The pump features a 1 inch inlet port and a 1/2 inch outlet port, with a shaft length of 1.75 inches and an overall depth of 5 inches. This unit weighs 15 pounds. Installation is typically performed by hydraulic system technicians and millwrights in applications requiring a compact, fixed-displacement vane pump.

The SDV-10410-1 is suited for use in industrial hydraulic power units and mobile equipment where consistent flow and reliable vane-pump performance are required. Its port sizing and shaft dimensions make it a practical fit for mid-range hydraulic circuits operating within its rated flow and speed envelope. This pump is intended for professional hydraulic system installation and should be matched to a compatible reservoir, filtration system, and pressure relief valve as part of a complete circuit design.

Key Features

• Rated operating speed of 1200 RPM for controlled, steady flow output
• Delivers 4 GPM at 1800 RPM for consistent hydraulic circuit performance
• 1 inch inlet port accommodates standard hydraulic supply line connections
• 1/2 inch outlet port for downstream circuit integration
• Shaft length of 1.75 inches for direct coupling to compatible prime movers
• Compact 5 inch depth suits confined hydraulic power unit enclosures

Compatibility

Designed as an OEM-style replacement or direct-install vane pump for industrial and mobile hydraulic systems requiring a 1 inch inlet, 1/2 inch outlet, and 4 GPM flow rate at the rated operating speed.

Installation Notes

Installation should be performed by a qualified hydraulic technician. Depressurize and lock out the hydraulic system fully before removing or installing any pump. Ensure the inlet line is free of air ingestion points and that a properly rated suction strainer is in place to protect vane components. Follow applicable OSHA lockout/tagout procedures and the equipment manufacturer's torque and alignment guidelines for the coupling and mounting flange.