Parker SC190M4 Male Button Shock Absorber M14 X 1.5

Product Description

The PARKER SC190M4 is a male button shock absorber designed to decelerate moving loads and absorb kinetic energy in industrial automation and motion control applications. The unit features a 0.63-inch stroke length, a 0.16-inch stainless steel rod diameter, and a 0.46-inch outside diameter body finished in black oxide. The M14 x 1.5 threaded mount allows for straightforward installation into standard mounting blocks or brackets. With an overall length of 4.5 inches and a weight of 0.18 pounds, this is a compact, lightweight component suited for space-constrained machine designs. Licensed millwrights, machine builders, and maintenance technicians are the typical installers.

This shock absorber is used in light-duty industrial automation settings where controlled deceleration of actuators, slides, or pneumatic cylinders is required. The male button style makes it appropriate for end-of-travel cushioning on linear motion systems, conveyor stops, and robotic positioning equipment. It operates across a temperature range of 32 degrees F to 150 degrees F, making it suitable for standard indoor industrial environments. It is not rated for outdoor or wash-down service without additional protection.

Key Features

• 0.63-inch stroke length for controlled deceleration of light moving loads
• M14 x 1.5 male thread for direct mounting into standard blocks or brackets
• Stainless steel rod resists corrosion in moderate industrial environments
• Black oxide steel body finish reduces surface corrosion
• Compact 0.46-inch outside diameter suits tight machine envelopes
• Operating temperature range of 32 degrees F to 150 degrees F

Compatibility

Designed as an OEM-style replacement or new-install male button shock absorber for light-duty industrial linear motion systems requiring an M14 x 1.5 threaded mount with a 0.63-inch stroke and 0.46-inch outside diameter body.

Installation Notes

Installation is typically performed by qualified machine builders or industrial maintenance technicians. Isolate and de-energize all pneumatic or mechanical energy sources before servicing or replacing the absorber. Verify thread engagement depth and ensure the mounting surface is clean and undamaged before torquing the unit into place. Do not exceed the rated stroke length by using the absorber as a hard mechanical stop.