Parker S15R30A String-wound Filter 20 Micron 30 Inch

Product Description

The PARKER S15R30A is a string-wound cartridge filter designed for plumbing and water filtration applications. It measures 30 inches in length with a 2.5 inch outside diameter and delivers filtration down to 20 microns. The filter media is polyester with a polypropylene plastic core, and it meets FDA material grade standards. This cartridge is suited for residential and light commercial water treatment systems where sediment removal is required before downstream equipment. Licensed plumbers and water treatment technicians are the typical installers.

This filter is used in standard cartridge filter housings found in potable water systems, process water lines, and pre-filtration stages protecting water heaters, softeners, and other plumbing equipment. The 20-micron rating captures sediment, rust particles, and suspended solids at a level appropriate for general-purpose prefiltration. The polyester string-wound construction maintains its form under continuous flow and resists degradation within its rated temperature range. It is well suited for both new installations and routine cartridge replacement service.

Key Features

• 20-micron filtration rating for effective sediment and particulate removal
• String-wound polyester media construction for consistent filtration depth
• Polypropylene plastic core provides structural rigidity under flow pressure
• FDA material grade polyester and core suitable for potable water contact
• 30-inch length fits long-body cartridge filter housings
• Rated to 120 degrees F maximum working temperature

Compatibility

Designed as an OEM-style replacement cartridge for standard 2.5 inch OD, 30 inch long cartridge filter housings used in residential and commercial plumbing filtration systems.

Installation Notes

Installation is typically performed by a licensed plumber or water treatment technician. Shut off the water supply and relieve system pressure before opening the filter housing. Inspect the housing o-ring and replace it if worn before reinstalling the housing cap. Follow applicable local plumbing codes and the housing manufacturer's torque guidance when reassembling the sump.