Parker PT-00234 Steel 90 Elbow 1-1/4 in Od Flare X Nptf

Product Description

The PARKER PT-00234 is a steel 90-degree flared tube elbow designed for use in high-pressure hydraulic and fluid power plumbing systems. It provides a right-angle connection between a 37-degree flared tube end and an NPTF threaded port. The fitting accepts a 1-1/4 inch tube outside diameter and uses a 1-11-1/2 NPTF thread on the male end. Rated to 3000 psi maximum dynamic working pressure, this elbow is built for demanding service in industrial and mobile hydraulic circuits. Licensed plumbers and hydraulic technicians install this type of fitting when routing tubing around obstructions or transitioning from tube to a threaded port in tight spaces.

This elbow is suited for hydraulic lines, refrigeration tubing, and other fluid conveyance systems where a 37-degree flare connection meets an NPTF port. It is appropriate for both industrial and commercial installations requiring a reliable 90-degree directional change with a secure, leak-resistant flare-and-thread joint. The NPTF thread provides a dry-seal connection without reliance on a separate sealant when properly assembled.

Key Features

• 90-degree elbow routes tubing at right angles to threaded ports
• 37-degree flare angle conforms to SAE flare fitting standards
• NPTF thread standard provides a dry-seal mechanical connection
• 3000 psi maximum dynamic working pressure rating
• Steel construction for strength in high-pressure applications
• 1-1/4 inch tube outside diameter accommodates larger-diameter tubing runs

Compatibility

Designed as an OEM-style replacement or service fitting for hydraulic and fluid power systems using 1-1/4 inch OD tube with 37-degree flare ends mating to 1-11-1/2 NPTF threaded ports.

Installation Notes

Installation should be performed by a licensed plumber, hydraulic technician, or qualified mechanic. Depressurize and drain the hydraulic or fluid system completely before removing or installing fittings. Inspect the flare seat and NPTF threads for damage or contamination before assembly. Torque to the fitting manufacturer and system design specifications only — do not over-tighten steel flare fittings, as this can deform the flare seat and cause leaks.