Parker PT-00069 Steel Flared Tube Reducer 3/4 in 37 Deg

Product Description

The PARKER PT-00069 is a steel flared tube reducer fitting designed to connect tubing lines where a reduction in line size is required at a flare-to-flare junction. Built with a 37-degree flare angle on both ends, this fitting meets the JIC flare standard commonly used in hydraulic and fluid power systems. The outside diameter is 3/4 inch, with thread sizing of 3/4 x 1/4. Rated to a maximum working pressure of 5000 psi, this reducer is suited for high-pressure hydraulic, pneumatic, and fluid transfer lines. Hydraulic technicians, plumbers, and mechanical contractors install this type of fitting in both industrial and commercial applications.

This fitting is used in hydraulic systems, fuel lines, refrigeration tubing, and other high-pressure fluid circuits where two flared tube ends must be joined with a size reduction. The flare x flare end configuration makes it a direct inline reducer without the need for adapters. Typical install scenarios include equipment repair, line rerouting, and system fabrication in industrial, commercial, and mobile equipment environments.

Key Features

• 37-degree flare angle on both ends meets JIC flare standards
• Rated to 5000 psi maximum dynamic working pressure
• 3/4 inch outside diameter with 3/4 x 1/4 thread sizing
• Flare x flare end connection for inline reducer installation
• Steel construction for durability in high-pressure service
• Sold in a package quantity of 2

Compatibility

Designed as an OEM-style replacement or service fitting for hydraulic and fluid power systems requiring a 37-degree JIC flare reducer at 3/4 inch tube OD.

Installation Notes

Installation should be performed by a qualified hydraulic technician or pipefitter familiar with JIC flare fittings. Depressurize and isolate the hydraulic or fluid circuit completely before removing or installing any fittings. Inspect flare seats on both the fitting and tubing for damage before assembly, as deformed flare seats are a common cause of leaks. Tighten to the fitting manufacturer's recommended procedure for JIC flare connections and verify the system is leak-free before returning to service.