Parker PP6VMC8-MG Bi-directional Ball Valve 3/8 in Npt

Product Description

The PARKER PP6VMC8-MG is a bi-directional manual ball valve designed for flow control in fluid handling and plumbing systems. Built with a polypropylene body, this valve connects via a male NPT thread on one end and a push-to-connect fitting on the other, making installation fast and straightforward. The lever handle allows for quick quarter-turn shutoff or flow direction control. Weighing 0.0655 pounds, it is a compact, lightweight component suited for low-pressure fluid lines. Licensed plumbers, HVAC technicians, and mechanical contractors install this type of valve in both residential and light commercial applications.

This valve is well suited for use in water treatment systems, filtration lines, refrigeration water supply connections, and general-purpose fluid distribution where a reliable manual shutoff is required. The push-to-connect end simplifies installation in tubing runs, reducing the need for additional fittings. The bi-directional design means flow can pass in either direction without affecting valve performance, providing installation flexibility in tight or awkward plumbing configurations. It is typically installed in-line on tubing with a 3/8 inch outside diameter.

Key Features

• Bi-directional ball valve design allows flow in either direction
• Polypropylene body offers resistance to corrosion and chemical exposure in fluid systems
• MNPT x push-to-connect end connection reduces installation time on 3/8 inch OD tubing
• Lever handle provides quick quarter-turn manual operation for shutoff or flow control
• Lightweight at 0.0655 pounds, suitable for compact plumbing assemblies

Compatibility

Designed as an OEM-style replacement or new-installation manual ball valve for fluid systems using 3/8 inch outside diameter tubing with NPT-threaded ports.

Installation Notes

This valve should be installed by a licensed plumber or qualified mechanical contractor following applicable IPC and local plumbing code requirements. Shut off the water supply and depressurize the line before beginning installation or replacement. Hand-tighten the MNPT connection first, then apply an appropriate thread sealant tape before torquing with a wrench. Verify the push-to-connect end is fully seated against the tubing stop before restoring system pressure.