Parker PP-00065 Barbed Female Swivel Fitting 1/4 in 1/2-20 Unf

Product Description

The PARKER PP-00065 is a barbed push-on hose female swivel fitting manufactured from brass. It is designed to connect flexible push-on hose to threaded ports, allowing the hose end to swivel for easier routing and reduced strain on the connection. The fitting accepts a 1/4-inch inside diameter hose and threads onto a 1/2-20 UNF port. Brass construction provides corrosion resistance and durability in fluid transfer applications. This fitting is installed by plumbers, HVAC technicians, and fluid-system technicians working on low-pressure hose assemblies.

This fitting is suited for residential and light commercial applications where a flexible hose must terminate at a fixed female swivel connection. Typical install scenarios include fuel line assemblies, hydraulic hand-tool circuits, and low-pressure fluid distribution systems where hose articulation or rotation at the connection point reduces wear. The 1/2-20 UNF thread standard is common in automotive and light-industrial fluid fittings.

Key Features

• Barbed push-on design secures flexible hose without additional clamps in low-pressure service
• Female swivel end allows hose to rotate freely, reducing torsional stress on the assembly
• 1/4-inch inside diameter barb matches standard quarter-inch push-on hose
• 1/2-20 UNF thread for compatibility with standard unified fine-thread ports
• Brass material resists corrosion in water, oil, and fuel service environments

Compatibility

Designed as a standard barbed push-on female swivel fitting for use with 1/4-inch inside diameter push-on hose and 1/2-20 UNF threaded ports in low-pressure fluid transfer applications.

Installation Notes

Installation should be performed by a qualified technician familiar with hose and fitting assemblies. Depressurize and drain the system completely before removing or installing any fitting. Confirm that hose inside diameter and working pressure rating are compatible with the fitting and the intended service before assembly. Thread engagement should be verified for proper seating without overtightening, which can crack brass fittings.