Parker PF-00349 Barbed Hose Fitting 3/4 Inch Brass

Product Description

The PARKER PF-00349 is a brass barbed hose fitting connector designed to join a 3/4-inch ID hose to a 3/4-inch threaded pipe connection. The barb-to-pipe end connection creates a secure, leak-resistant seal when the hose is clamped onto the barbed end. Constructed from brass, this connector handles working temperatures from -40 degrees F to 160 degrees F, making it suitable for a wide range of fluid transfer and plumbing applications. The 1.0625-inch hex head allows for standard wrench installation, and the overall length of 2.04 inches keeps the assembly compact. This fitting is installed by licensed plumbers and HVAC technicians in both residential and light commercial systems.

This connector is well suited for use in water supply lines, hydronic heating systems, cooling equipment drain lines, and similar fluid-handling assemblies where a hose-to-pipe transition is required. The threaded connection conforms to standard pipe thread configurations, making it a practical choice for repair and new-installation work across residential and light commercial settings. This fitting ships in a package quantity of two units.

Key Features

• Brass construction provides corrosion resistance for fluid transfer applications
• Barb-to-pipe end connection design for secure hose-to-threaded-pipe transitions
• Threaded connection type compatible with standard pipe thread
• Operating temperature range of -40 degrees F to 160 degrees F
• 1.0625-inch hex head for wrench installation
• Compact overall length of 2.04 inches

Compatibility

Designed as an OEM-style replacement or new-install fitting for 3/4-inch ID hose assemblies requiring a barbed connector with a 3/4-inch threaded pipe end.

Installation Notes

Installation should be performed by a licensed plumber or qualified HVAC technician in accordance with applicable IPC and local plumbing codes. Shut off the fluid supply and relieve system pressure before disassembling any hose or fitting. Apply thread sealant or PTFE tape to the threaded end before tightening, and secure the hose to the barbed end with an appropriately rated hose clamp. Do not overtighten the threaded connection, as brass fittings can crack under excessive torque.