Parker PC326-BP 45 Deg Push-lok Hose Barb Coupler 3/8 Inch

Product Description

The PARKER PC326-BP is a 45-degree Push-Lok hose barb coupler designed for high-temperature fluid control in industrial and process cooling applications. Machined from brass, this non-valved coupler connects 3/8-inch inside-diameter hose to a threaded port using a push-to-connect barb interface. It carries a maximum working pressure of 200 psi and handles temperatures from -20 degrees F to 400 degrees F. The Moldmate series design targets die casting equipment and mold coolant line installations where reliable, leak-free connections under thermal cycling are critical. Industrial maintenance technicians and fluid power specialists are the primary installers.

This coupler is specified for use in die casting equipment and mold coolant lines where coolant must be routed efficiently through tight routing paths. The 45-degree hose barb angle reduces hose stress at the connection point and allows routing in confined spaces. The brass body resists corrosion from water-based coolants and mold release agents common in die casting environments. Installations in both light-industrial and heavy-production facilities are typical applications for the Moldmate series.

Key Features

• 45-degree Push-Lok hose barb design for tool-free hose attachment
• Brass body construction for corrosion resistance with water-based coolants
• 200 psi maximum working pressure
• Wide service temperature range: -20 degrees F to 400 degrees F
• Non-valved design allows unrestricted flow when connected
• Threaded port connection on the coupler body

Compatibility

Designed for use with die casting equipment and mold coolant lines as part of the PARKER Moldmate series. Accepts 3/8-inch inside-diameter Push-Lok hose.

Installation Notes

Installation is typically performed by fluid power technicians or industrial maintenance personnel. Depressurize and drain the coolant circuit fully before disconnecting or installing any fittings. Verify that the mating hose inside diameter matches the 3/8-inch barb size before assembly, and ensure the threaded port connection is sealed appropriately per the system design. Follow applicable plant safety procedures and fluid system codes when working on pressurized coolant lines.