Parker M39R10A Cartridge Filter 1 Micron 10 in String Wound

Product Description

The PARKER M39R10A is a string-wound polypropylene cartridge filter designed for plumbing and water filtration applications. Measuring 10 inches in length with a 2.5-inch outside diameter, this filter delivers 1-micron filtration performance to capture fine sediment and particulates from water supplies. The string-wound construction provides graduated density filtration, trapping larger particles in the outer layers and finer particles closer to the core. Both the filter media and core are made from polypropylene, and the filter meets FDA material grade standards. Licensed plumbers and water treatment technicians are the primary installers for this type of cartridge.

This filter is suited for residential and light commercial water filtration systems where fine sediment removal is required. Typical installations include whole-house sediment filter housings, under-sink pre-filtration stages, and point-of-entry water treatment systems. The 1-micron rating makes it appropriate for applications requiring removal of fine sand, silt, rust, and similar particulates. The polypropylene construction resists a range of common water contaminants and maintains integrity up to 120 degrees F.

Key Features

• 1-micron filtration rating for fine sediment and particulate removal
• String-wound construction provides graduated depth filtration
• Polypropylene fiber media with polypropylene plastic core
• FDA material grade compliance for potable water use
• Rated for water temperatures up to 120 degrees F
• Standard 10-inch length fits widely available filter housings

Compatibility

Designed as an OEM-style replacement cartridge for standard 10-inch plumbing filter housings that accept a 2.5-inch outside diameter string-wound cartridge.

Installation Notes

Installation is typically performed by a licensed plumber or water treatment technician. Shut off the water supply and relieve system pressure before opening the filter housing. Follow local plumbing codes, including applicable IPC requirements, when installing or servicing filtration equipment. Do not exceed the rated maximum working temperature of 120 degrees F.