Parker KP60282 Multipurpose Air Hose 7/8 in Id 25 Ft 800 Psi

Product Description

The PARKER KP60282 is a multipurpose air hose rated for demanding compressed-air applications in industrial, mechanical, and trade service environments. Built with a synthetic rubber construction, this hose handles a working pressure of 800 psi and carries a vacuum rating of 68 kPa, making it suitable for both pressure and light vacuum service. The 7/8 inch inside diameter supports high-volume airflow, reducing pressure drop across longer tool runs. At 25 feet in length, it gives technicians and mechanics adequate reach on the shop floor or job site without excessive hose drag. Plumbers, HVAC techs, and general contractors commonly keep multipurpose air hose on hand for pneumatic tool operation, blow-off, and inflation tasks.

This hose is suited for use in light industrial, commercial, and trade service settings where compressed air is supplied to pneumatic tools, impact wrenches, air ratchets, blow guns, and similar equipment. The synthetic rubber body resists weathering and surface abrasion under typical shop conditions. The 25-foot working length covers most standard compressor-to-tool distances without requiring hose extensions on the majority of single-bay or mobile service setups.

Key Features

• 800 psi working pressure supports high-demand pneumatic tool operation
• 7/8 inch inside diameter delivers high-volume airflow with reduced pressure drop
• Synthetic rubber construction provides abrasion and weather resistance
• 68 kPa vacuum rating allows use in light vacuum service applications
• 25-foot length provides practical reach for shop floor and job-site use
• 1.23 inch outside diameter for standard hose fitting compatibility

Compatibility

Designed as a general-purpose replacement or service hose for compressed-air systems using standard fittings compatible with 7/8 inch ID air hose assemblies.

Installation Notes

Installation and replacement of compressed-air hose should be performed by a qualified technician familiar with the operating pressure ratings of the connected system. Always depressurize the air supply and bleed residual pressure from the line before disconnecting or attaching hose assemblies. Verify that all end fittings are rated at or above the 800 psi working pressure of this hose before placing the system back in service. Inspect the hose for kinks, cuts, or coupling separation prior to each use.