Parker H2EVXBG023D 4-way 2-position Solenoid Valve

Product Description

The PARKER H2EVXBG023D is a 4-way, 2-position solenoid valve designed for pneumatic control applications. In its unactuated state, the valve is normally open through ports 1 and 2, making it suited for fail-safe pneumatic circuit designs where flow must be maintained on power loss. The body is machined aluminum and the seals are nitrile, providing resistance to a broad range of pneumatic system fluids and lubricants. The valve operates on 120 VAC and carries a Cv rating of 3.0, supporting moderate-to-high flow pneumatic circuits. It is IP65 rated for dust and water resistance and meets ISO 1179 specifications. Licensed HVAC and industrial technicians, as well as automation specialists, typically specify this valve in directional control circuits.

The H2EVXBG023D is intended for pneumatic directional control in industrial and commercial automation systems. BSPP threaded ports allow integration with subbase manifolds and subbase-mounted pneumatic assemblies that conform to ISO 1179 and BSPP manifold port standards. The operating temperature range of 5 degrees F to 120 degrees F suits both indoor and light-duty outdoor pneumatic installations. This valve is appropriate for applications where a solenoid-actuated directional shift is required in a 4-way circuit, such as cylinder actuation, actuator control, or pneumatic switching tasks.

Key Features

• 4-way, 2-position directional control with normally open state through ports 1 and 2
• BSPP threaded ports compatible with ISO 1179 subbase and manifold mounting
• Aluminum body construction for lightweight, corrosion-resistant service
• Nitrile seals suitable for standard pneumatic system media
• Cv rating of 3.0 for moderate-to-high flow capacity
• IP65 rated for protection against dust ingress and water jets
• cCSAus approved for North American installations

Compatibility

Designed for use with BSPP manifold and subbase port assemblies meeting ISO 1179 specifications in pneumatic directional control circuits.

Installation Notes

Installation should be performed by a qualified industrial technician or licensed trades professional familiar with pneumatic and low-voltage electrical systems. De-energize all electrical power and depressurize the pneumatic circuit fully before removing or installing this valve. BSPP threaded connections require appropriate thread sealant compatible with pneumatic service; consult applicable system and plumbing codes for thread engagement requirements. Verify supply voltage is 120 VAC and that the circuit is properly fused before energizing the coil.