Parker F602-06WJR/M4 Air Filter 3/4 Npt 220 Scfm 40 Micron

Product Description

The PARKER F602-06WJR/M4 is a heavy-duty compressed air filter designed to remove particulate contamination from compressed air lines in industrial and commercial pneumatic systems. Rated at 220 standard cubic feet per minute (SCFM) with a 40-micron polypropylene filter element, it delivers reliable filtration at flow rates common in production and mechanical service environments. The unit features an automatic drain and a zinc bowl with a built-in sight glass, allowing technicians to monitor bowl level without disassembly. Connections are 3/4 inch NPT, making integration into existing threaded air lines straightforward. Licensed mechanical and pneumatic technicians are the primary installers of this component.

This filter is suited for compressed air systems in manufacturing facilities, HVAC mechanical rooms, industrial maintenance shops, and similar environments where clean, dry air supply is critical to downstream equipment performance. The 16-ounce bowl capacity and automatic drain reduce maintenance intervals on high-cycle systems. A minimum operating temperature of 40 degrees F makes it appropriate for conditioned indoor installations. The 40-micron rating targets coarse particulate and is typically used as a first-stage or general-line filter upstream of regulators, lubricators, or sensitive pneumatic tooling.

Key Features

• 220 SCFM flow capacity for high-demand compressed air applications
• 40-micron polypropylene filter media removes coarse particulate
• Automatic drain eliminates manual bowl-drain maintenance steps
• Zinc bowl with integrated sight glass for visual condensate monitoring
• 3/4 inch NPT end connections for direct threaded-line installation
• 16-ounce bowl capacity supports extended service intervals

Compatibility

Designed as an OEM-style heavy-duty compressed air filter for 3/4 inch NPT threaded compressed air distribution systems requiring 40-micron particulate filtration and automatic drain functionality.

Installation Notes

Installation should be performed by a qualified millwright, pipefitter, or pneumatic systems technician. Depressurize and lock out the compressed air supply before removing or installing any inline filter. Apply appropriate thread sealant to NPT connections per local piping codes and the system manufacturer's recommendations. Orient the bowl in a downward vertical position to ensure the automatic drain functions correctly and condensate does not accumulate in the air stream.