Parker EHG05D2T Cartridge Filter Housing 50 Gpm 5 Cartridge

Product Description

The PARKER EHG05D2T is a multi-cartridge filter housing designed for industrial and commercial liquid filtration applications. It accommodates five filter cartridges with a 2.5-inch outside diameter, providing high-capacity flow with a maximum rated flow rate of 50 GPM through a 2-inch pipe connection. The housing is rated for a maximum working pressure of 150 psi and a maximum working temperature of 300 degrees F, making it suitable for demanding process fluid, water treatment, and chemical handling systems. Licensed plumbers, pipefitters, and industrial maintenance technicians typically specify and install this unit.

This filter housing is used in process piping systems that require multi-element filtration in a single housing body. The 2-inch pipe size and five-cartridge configuration make it well suited for higher-flow applications where a single-cartridge housing would create excessive pressure drop or require too-frequent changeouts. Typical installations include commercial water treatment skids, industrial process lines, and chemical distribution systems where consistent fluid clarity and particulate removal are critical to downstream equipment performance.

Key Features

• Holds five filter cartridges simultaneously, reducing changeout frequency on high-flow systems
• 2-inch pipe connection supports flow rates up to 50 GPM
• Rated to 150 psi maximum working pressure for demanding process applications
• Maximum working temperature of 300 degrees F suitable for hot fluid service
• Cartridge outside diameter of 2.5 inches for standard industry-compatible elements

Compatibility

Designed as an OEM-style multi-cartridge filter housing for industrial and commercial process piping systems using 2.5-inch outside diameter standard filter cartridges with a 2-inch pipe connection.

Installation Notes

Installation should be performed by a licensed pipefitter or plumber in accordance with applicable local codes and system design specifications. Depressurize and drain the system fully before opening the housing for cartridge installation or replacement. Verify that upstream pressure does not exceed the 150 psi housing rating and that process fluid temperature remains within the 300 degrees F limit. Use appropriate thread sealant rated for the process fluid on all pipe connections.