Parker BVHC8-8F Hydraulic Hose Valve Fitting 2000 Psi

Product Description

The PARKER BVHC8-8F is a straight hydraulic hose valve fitting designed for use in high-pressure fluid conveyance systems. Built from brass with a threaded NPTF connection, it delivers a rated working pressure of 2,000 psi and handles temperatures from -35 degrees F to 250 degrees F. At 2.09 inches in overall length with a 1/2-inch hose size and 1/2-inch thread size, this fitting is compact enough for tight installations while maintaining the pressure integrity that hydraulic circuits demand. Licensed plumbers, hydraulic system technicians, and mobile equipment mechanics are the typical installers.

This valve fitting is suited for industrial hydraulic lines, mobile equipment hydraulic circuits, and water and coolant lines. Its straight body geometry makes it a direct inline connector where routing changes are not required. The 1/2-inch NPTF thread ensures a dry-seal connection, reducing the risk of leakage in systems where consistent pressure is critical. The Series H designation places it within a defined product family intended for demanding fluid power applications across both stationary and mobile platforms.

Key Features

• 2,000 psi maximum working pressure rated for demanding hydraulic service
• Brass construction offers corrosion resistance in water, coolant, and hydraulic fluid applications
• NPTF threaded connection provides a dry-seal fit without requiring additional sealant tape in many applications
• Straight body shape simplifies inline installation and routing
• Operating temperature range of -35 degrees F to 250 degrees F covers most industrial and mobile equipment environments
• Compact 2.09-inch overall length suits confined mounting locations

Compatibility

Designed for use with industrial hydraulic lines, mobile equipment hydraulic circuits, and water and coolant lines requiring a 1/2-inch NPTF threaded hose valve fitting rated to 2,000 psi.

Installation Notes

Installation should be performed by a qualified hydraulic technician or licensed mechanic familiar with fluid power systems. Depressurize and isolate the hydraulic circuit completely before removing or installing any fitting. Inspect threads for damage before assembly and apply appropriate thread sealant per system requirements and applicable fluid power standards. Do not exceed the 2,000 psi rated working pressure of this fitting.