Parker BVHC24-24F Hose Valve Fitting 350 Psi 1-1/2 in Npt

Product Description

The PARKER BVHC24-24F is a straight brass hose valve fitting rated for hydraulic and fluid-transfer service. It carries a maximum working pressure of 350 psi and is built for industrial hydraulic lines, mobile equipment, and water and coolant lines. The fitting uses a 1-1/2 inch NPT threaded connection on both ends, with a 1-1/2 inch hose size and a matching 1-1/2 inch body diameter. The all-brass construction resists corrosion in wet and fluid-media environments. Operating temperature range runs from -35 degrees F to 250 degrees F, making it suitable for demanding seasonal and industrial conditions. Licensed plumbers, hydraulic technicians, and fluid-power mechanics are the typical installers.

The BVHC24-24F is designed for use on industrial hydraulic lines, mobile equipment fluid circuits, and water and coolant systems where a reliable threaded shutoff or isolation point is required. The straight configuration simplifies inline installation in tight or space-constrained plumbing runs. Its Series H designation places it within a family of hose fittings engineered for moderate-to-high pressure hydraulic service. This fitting ships individually and is ordered in single-unit quantities.

Key Features

• 350 psi maximum working pressure for hydraulic and fluid-service applications
• 1-1/2 inch NPT threaded connection for secure, leak-resistant assembly
• Brass body construction for corrosion resistance in wet and fluid-media environments
• Straight configuration simplifies inline valve or isolation-point installation
• Operating range of -35 degrees F to 250 degrees F suits industrial and seasonal conditions
• Compatible with industrial hydraulic lines, mobile equipment, and water and coolant lines

Compatibility

Designed for use with industrial hydraulic lines, mobile equipment fluid circuits, and water and coolant lines requiring a 1-1/2 inch NPT threaded straight hose valve fitting rated to 350 psi.

Installation Notes

Installation should be performed by a licensed plumber or qualified hydraulic technician. Depressurize the hydraulic or fluid system completely and relieve all residual pressure before removing or installing any fitting. Use appropriate thread sealant or PTFE tape on NPT threads and tighten to snug with a wrench — avoid overtightening brass fittings, which can crack under excess torque. Verify that the installed assembly holds rated pressure before returning the system to service.