Parker BDNN6-0500050-1 Nylon Tube 3/8 Inch Od 250 Psi 50 Ft

Product Description

The PARKER BDNN6-0500050-1 is a flexible nylon tubing sold in a 50-foot coil, designed for use in pneumatic, hydraulic, and fluid transfer applications across industrial and mechanical service environments. With an inside diameter of 0.275 inches and an outside diameter of 3/8 inch, this tube handles a maximum working pressure of 250 psi and operates across a temperature range of -65 to 200 degrees F. Its natural color and nylon construction make it a reliable choice for routing lines in tight spaces where flexibility and chemical resistance are both required. Licensed trades and maintenance technicians install this type of tubing in equipment rooms, service panels, and process lines.

This tubing is suited for both residential and light commercial applications where flexible, medium-pressure fluid lines are needed. It is commonly routed for air supply lines, hydraulic fluid circuits, lubricant delivery, chemical transfer, pesticide dispensing systems, and water lines. The 50-foot coil length provides enough material for most single-system installations without splicing. A minimum bend radius of 1.13 inches allows for compact routing without kinking.

Key Features

• Flexible nylon construction handles pressure up to 250 psi
• Wide temperature range: -65 to 200 degrees F suits demanding environments
• 0.275 inch ID and 3/8 inch OD for standard pneumatic and hydraulic fittings
• Minimum bend radius of 1.13 inches supports tight routing paths
• Compatible with air, water, hydraulic fluid, lubricants, chemicals, and pesticides
• 50-foot coil length minimizes waste on standard single-system runs

Compatibility

Designed as a general-purpose flexible nylon tube for use with air, hydraulic fluid, lubricants, chemicals, pesticides, and water systems where 3/8 inch OD tubing and standard compression or push-to-connect fittings are specified.

Installation Notes

Installation is typically performed by licensed plumbers, HVAC technicians, or industrial maintenance technicians depending on the application. Before servicing or replacing tubing on pressurized systems, depressurize the circuit completely and relieve any stored fluid pressure. Ensure fittings are rated to match the 250 psi working pressure of this tubing. Avoid exceeding the 1.13 inch minimum bend radius to prevent kinking and flow restriction.