Parker BD11610 Nylon Tube 3/8 in Od 100 Ft Blue

Product Description

The PARKER BD11610 is a blue nylon tubing coil used for pneumatic lines, fluid transfer, and low-pressure plumbing in industrial and mechanical service applications. It measures 0.251 inches inside diameter and 3/8 inches outside diameter, supplied in a 100-foot coil. The nylon construction offers flexibility with moderate rigidity, making it suitable for routing in tight spaces. It handles a maximum working pressure of 150 psi and operates across a temperature range of -40 degrees F to 200 degrees F. Plumbers, HVAC technicians, and industrial service technicians commonly install this tubing in compressed air, instrumentation, and fluid conveyance systems.

This tubing is well suited for residential and light commercial mechanical systems where a flexible, corrosion-resistant line is required. Common applications include pneumatic control lines, air tool supply runs, and low-pressure fluid transfer. The 100-foot coil length provides enough material for most single-zone or multi-drop installations without splicing. The blue color aids in line identification when multiple tube types or services are routed together in the same panel or cabinet.

Key Features

• Nylon construction resists corrosion and is compatible with many pneumatic and fluid media
• 150 psi maximum working pressure supports standard compressed air and low-pressure fluid service
• Wide temperature range from -40 degrees F to 200 degrees F suits both cold-climate and warm mechanical environments
• 0.251 inches ID and 3/8 inches OD for compatibility with standard push-to-connect and compression fittings
• 100-foot coil minimizes field splices on longer runs
• Blue color simplifies line identification in multi-service installations

Compatibility

Designed as an OEM-style replacement or new-installation tubing for pneumatic control and fluid transfer systems requiring 3/8 inch OD nylon tube with push-to-connect or compression-style fittings.

Installation Notes

Depressurize and isolate the pneumatic or fluid circuit completely before cutting or connecting tubing. A clean, square cut with a dedicated tube cutter ensures a proper seal at push-to-connect or compression fittings. Avoid sharp bend radii that could kink the nylon wall and restrict flow or reduce pressure rating. Follow applicable mechanical and pneumatic codes when integrating into regulated systems.