Parker BD11607 Nylon Tube 0.251 Id 3/8 Od 100 Ft Red

Product Description

The PARKER BD11607 is a red nylon tubing coil designed for pneumatic, fluid transfer, and instrumentation applications across HVAC, industrial, and mechanical systems. With an inside diameter of 0.251 inches and an outside diameter of 3/8 inches, this tubing is engineered to handle a maximum working pressure of 150 psi. It operates across a wide temperature range of -40 degrees F to 200 degrees F, making it suitable for both cold-weather and elevated-temperature service environments. The 100-foot coil length gives installers enough material for most runs without mid-job splicing. Licensed HVAC technicians, plumbers, and mechanical contractors are the primary installers of this product type.

This nylon tubing is commonly used in pneumatic control lines, compressed air distribution, vacuum lines, and low-pressure fluid transfer applications. Its flexibility at low temperatures and resistance to many common shop fluids make it a practical choice for routing through tight spaces in mechanical rooms, rooftop units, and equipment panels. The red color aids in identification when multiple tubing lines run in parallel. It is sold as a single 100-foot coil.

Key Features

• Inside diameter of 0.251 inches and outside diameter of 3/8 inches for standard pneumatic fittings
• Maximum working pressure of 150 psi
• Wide service temperature range: -40 degrees F to 200 degrees F
• Red color for easy line identification in multi-tube installations
• Nylon construction offers flexibility and resistance to abrasion
• 100-foot coil length reduces the need for mid-run connections

Compatibility

Designed as an OEM-style replacement or new-installation nylon tubing for pneumatic and fluid transfer lines requiring a 3/8 inch OD nylon tube compatible with standard push-to-connect and compression fittings.

Installation Notes

Nylon tubing installation is typically performed by licensed HVAC technicians, plumbers, or mechanical contractors. De-energize and depressurize the system before cutting or connecting tubing. Use a clean, square cut to ensure a proper seal at push-to-connect or compression fittings. Refer to local mechanical codes and the fitting manufacturer's instructions for maximum allowable working pressures and proper support intervals.