Parker BD-PP-00467 Hydraulic Hose 2500 Psi 1 in Id

Product Description

The PARKER BD-PP-00467 is a synthetic rubber hydraulic hose designed for medium-pressure fluid power applications. It features a 1 inch inner diameter and a 1.39 inch outer diameter, with a rated working pressure of 2,500 psi. The 6 inch minimum bend radius allows for routing in moderately tight installations without kinking or flow restriction. This hose is suited for hydraulic circuits in industrial machinery, mobile equipment, and similar systems where flexible, pressure-rated fluid conveyance is required. Installation is typically performed by hydraulic technicians or mechanical contractors familiar with hose assembly and fitting selection.

This hose is applicable in hydraulic systems that require a 1 inch ID flexible line rated to 2,500 psi working pressure. The synthetic rubber construction provides resistance to hydraulic fluid degradation and moderate temperature variation. It is commonly used in press circuits, lift systems, mobile hydraulics, and general industrial fluid power lines where a mid-range pressure rating and flexible routing are required. Verify system pressure, fluid compatibility, and fitting end configurations before installation.

Key Features

• 1 inch inner diameter for high-flow hydraulic circuit applications
• 2,500 psi working pressure rating for medium-pressure systems
• 1.39 inch outer diameter for standard hose clamp and fitting compatibility
• 6 inch minimum bend radius supports routed installations without kinking
• Synthetic rubber construction resists hydraulic fluid and moderate heat

Compatibility

Designed as an OEM-style replacement or new-installation hydraulic hose for fluid power systems requiring a 1 inch ID line rated to 2,500 psi working pressure with synthetic rubber construction.

Installation Notes

Hydraulic hose installation should be performed by a qualified hydraulic technician or mechanic. Depressurize and bleed the hydraulic system fully before disconnecting or replacing any hose. Ensure selected end fittings are rated at or above the hose working pressure and are compatible with the system fluid. Do not exceed the 6 inch minimum bend radius during routing, and avoid twisting the hose during assembly.