Parker BD-E-64-0100-1 Polyethylene Tube 100 Ft

Product Description

The PARKER BD-E-64-0100-1 is a clear natural polyethylene tube rated for a wide range of fluid and pneumatic transfer applications. It features a 0.25 inch inner diameter, a 0.375 inch outer diameter, and a wall thickness of 0.062 inches. The tube is sold in a 100-foot length and carries a maximum working pressure of 125 psi. Operating temperature range spans -80 degrees F to 150 degrees F, making it suitable for environments with moderate thermal variation. Plumbers, HVAC technicians, and general trade contractors install this tubing where a lightweight, flexible, chemically compatible line is required.

This tube is designed for use with air, potable water, and general water service in both residential and light commercial installations. Its FDA-compliant polyethylene construction and NSF-51 and NSF-61 certifications make it appropriate for drinking water contact applications. The clear natural finish allows visual flow verification without cutting into the line. A minimum bend radius of 1.25 inches supports routing through tight spaces without kinking or flow restriction.

Key Features

• 125 psi maximum working pressure for air and water service
• Temperature rated from -80 degrees F to 150 degrees F
• FDA compliant and NSF-51 and NSF-61 certified for potable water contact
• Clear natural color allows visual inspection of flow
• 1.25 inch minimum bend radius for flexible routing in confined spaces
• Meets ASTM D-1248 and ASTM D-1693 standards

Compatibility

Rated for use with air, potable water, and water systems. Suitable as a flexible supply or transfer line in HVAC, plumbing, and light industrial applications where polyethylene tubing is specified.

Installation Notes

Installation is typically performed by licensed plumbers or HVAC technicians. Shut off system pressure and depressurize the line completely before cutting or connecting this tubing. Use a clean, square tube cut and appropriate compression or push-to-connect fittings rated for the application pressure and fluid type. Verify fitting and tubing compatibility before pressurizing the system, and confirm all potable water connections comply with applicable local plumbing codes and NSF requirements.