Parker A6ME4-MG Push-to-connect Male Elbow 3/8 in Od

Product Description

The PARKER A6ME4-MG is a push-to-connect male elbow tube fitting designed for tube-to-pipe connections in pneumatic and fluid transfer applications. Manufactured from polyoxymethylene (POM), this fitting accepts 3/8 inch OD tubing on the push-connect end and threads into a 1/4 inch NPTF female port. The 90-degree elbow configuration allows direction changes in tight plumbing runs without additional adapters. Rated to 300 psi, it is suited for compressed air, water, and compatible fluid service lines. Licensed plumbers, HVAC technicians, and industrial maintenance technicians commonly install this fitting in control line and instrument tubing assemblies.

This fitting is appropriate for residential and light commercial pneumatic control systems, HVAC equipment connections, and general-purpose fluid distribution lines where push-to-connect convenience and compact routing are required. The NPTF thread provides a pressure-tight mechanical seal without requiring sealant tape on properly mated ports, though PTFE tape is commonly used in field practice. The tan POM body resists moisture and mild chemical exposure typical in HVAC and plumbing environments.

Key Features

• Push-to-connect design accepts 3/8 inch OD tubing without tools for fast assembly
• 1/4 inch NPTF male thread for pressure-tight pipe port connection
• Polyoxymethylene (POM) body for chemical resistance and dimensional stability
• 300 psi pressure rating suitable for compressed air and water service
• 90-degree elbow configuration for compact directional routing
• Tan color finish for easy visual identification in mixed fitting installations

Compatibility

Designed as an OEM-style replacement or new-installation fitting for pneumatic control lines and fluid distribution systems using 3/8 inch OD tubing and 1/4 inch NPTF female threaded ports.

Installation Notes

Installation is typically performed by licensed plumbers, HVAC technicians, or qualified industrial mechanics. Shut off and depressurize the system completely before removing or installing any fitting. Ensure tubing is cut cleanly and squarely, deburred, and fully inserted into the push-connect collet until it seats to achieve a proper seal. Do not exceed the rated 300 psi working pressure, and verify fluid compatibility with POM before installation in chemical service applications.