Parker 821FR-8-BLU-RL Push-on Air Hose 1/2 in Id 300 Psi

Product Description

The PARKER 821FR-8-BLU-RL is a push-on air hose designed for compressed air service in industrial and trade applications. Built from synthetic rubber, this blue hose carries a 1/2 inch inside diameter and is rated for 300 psi working pressure. The temperature range spans -40 degrees F to 212 degrees F, making it suitable for both cold-storage environments and high-heat service areas. It is sold by the foot in cut-to-length increments with a 25-foot minimum cut, drawn from a 385-foot coil. HVAC technicians, plumbers, and general contractors use this type of hose for pneumatic tool lines, compressor drops, and shop air distribution systems.

This hose is used in residential and commercial mechanical rooms, job-site compressed air setups, and permanent shop air installations. The push-on design eliminates the need for clamps or ferrules at the fitting connection, which speeds up assembly and reduces hardware cost. The 1/2 inch ID is a common size for moderate-flow pneumatic tool lines and air compressor supply drops. Because it is priced and cut by the foot, contractors can order the exact footage needed for a run without buying a fixed-length assembly.

Key Features

• Push-on construction requires no clamps or crimped ferrules for installation
• 300 psi working pressure rated for standard compressed air service
• Synthetic rubber construction handles a -40 degrees F to 212 degrees F service range
• 1/2 inch inside diameter fits common pneumatic tool and air supply fittings
• Sold in 1-foot increments with a 25-foot minimum cut from a 385-foot coil
• Blue color for easy identification in multi-hose installations

Compatibility

Designed as an OEM-style replacement or new-installation hose for compressed air systems requiring a 1/2 inch ID push-on hose rated to 300 psi.

Installation Notes

Installation is typically performed by HVAC technicians, pipefitters, or qualified mechanical contractors working on compressed air distribution systems. Always depressurize and bleed the air line completely before disconnecting or splicing into an existing system. Ensure the mating push-on fittings are clean, undamaged, and dimensionally compatible with a 1/2 inch ID hose before assembly. Consult applicable mechanical and safety codes for compressed air systems in your jurisdiction prior to permanent installation.