Parker 8002N-1A1-DX Oil Water Filter Separator 63 Cfm

Product Description

The PARKER 8002N-1A1-DX is a compressed air oil-water filter separator designed to remove dust, oil, particulate, and water from compressed air lines. It flows up to 63 CFM and handles pressures up to 250 psi, making it suitable for industrial and commercial pneumatic systems. The unit features an automatic drain, which eliminates the need for manual purging during operation. At 8.5 inches tall and 3.3 inches wide, it fits into tight inline installations. Licensed HVAC, plumbing, and mechanical contractors install this type of separator to protect downstream equipment from contaminated air.

This filter separator is intended for inline compressed air applications where oil, water, and particulate contamination must be controlled before air reaches pneumatic tools, controls, or process equipment. The 1/4 NPT end connections allow direct threaded installation into standard compressed air distribution piping. It is rated for continuous service up to 130 degrees F, making it appropriate for typical mechanical room and shop environments. The automatic drain continuously discharges accumulated condensate without interrupting system operation.

Key Features

• 63 CFM flow capacity for compressed air lines
• 250 psi maximum working pressure
• Automatic drain eliminates manual condensate purging
• 1/4 NPT end connections for standard threaded pipe installation
• Removes dust, oil, particulate, and water from compressed air
• Rated up to 130 degrees F maximum operating temperature

Compatibility

Designed as an OEM-style inline compressed air filter separator for pneumatic systems requiring 1/4 NPT connections and flow rates up to 63 CFM.

Installation Notes

Installation should be performed by a qualified mechanical or pneumatic systems technician. Depressurize and lock out the compressed air system completely before installing or servicing this unit. Ensure the separator is oriented correctly per the manufacturer marking to allow the automatic drain to function properly. Refer to applicable mechanical codes and the system manufacturer guidelines for torque and thread sealant requirements on NPT fittings.