Parker 73216BN2MT00 Solenoid Valve 1/4 in Npt Brass

Product Description

The PARKER 73216BN2MT00 is a direct-acting, 2-way, 2-position solenoid valve designed for precise fluid or gas shutoff in industrial and mechanical systems. It features a 1/4 inch NPT port, a brass body, and a polytetrafluoroethylene (PTFE) seal rated for service up to 210 degrees F. The valve ships without a coil — an integrated coil must be ordered separately to complete the assembly. With a maximum working pressure of 1500 psi and a Cv factor of 0.76, this valve suits demanding pressure control applications. Licensed electricians, pipefitters, and HVAC-R technicians are the primary installers of this valve type.

This valve is suited for use in industrial fluid control, pneumatic systems, refrigeration circuits, and process piping where a normally closed, direct-acting solenoid valve with NPT threading is required. Its brass construction and PTFE sealing make it compatible with a range of media including water, air, and many common process fluids. The minimum operating pressure differential is 5 psi, which must be maintained for reliable direct-acting operation. Residential and light commercial mechanical systems that require a 1/4 inch NPT normally closed valve are also typical application environments.

Key Features

• Direct-acting, 2-way, 2-position normally closed configuration
• 1/4 inch NPT port with 1/4 inch orifice size
• Brass body for corrosion resistance in fluid and gas service
• PTFE seal rated to 210 degrees F maximum operating temperature
• 1500 psi maximum working pressure for high-pressure system use
• CSA Certified, NEMA 4X rated, and UL Listed
• Coil not included — requires separately sourced integrated coil for complete valve operation

Compatibility

Designed as an OEM-style direct-acting solenoid valve for systems requiring a 1/4 inch NPT normally closed valve with brass body construction. Confirm coil voltage and interface compatibility before ordering, as the coil is sold separately.

Installation Notes

Installation should be performed by a licensed pipefitter, plumber, or HVAC-R technician familiar with solenoid valve assemblies. Shut off system pressure and de-energize all electrical circuits before installation or service. Verify the integrated coil voltage matches the supply voltage before energizing — available supply voltages for compatible coils include 12 Vdc, 24 Vdc, 24/60 Vac, 120 Vdc, 120/60 to 110/50 Vac, and 240/60 to 220/50 Vac. Apply appropriate thread sealant to NPT connections and confirm flow direction and minimum pressure differential requirements are met prior to startup.

WARNING: This product can expose you to chemicals including lead, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.