Parker 725838BKRS-600 High Pressure Neoprene Hose 50 Ft

Product Description

The PARKER 725838BKRS-600 is a 50-foot high-pressure neoprene hose assembly rated for 3,000 psi service. It is built with a 3/8-inch inside diameter and a 5/8-inch outside diameter, and it ships pre-fitted with male rigid and male swivel end fittings at opposing ends. The temperature range spans -40 degrees F to 250 degrees F, making it suitable for demanding fluid transfer applications where both pressure and thermal cycling are factors. Weighing 10 pounds, this is a complete hose assembly ready for installation by HVAC technicians, plumbers, or industrial service professionals.

This hose assembly is used in high-pressure fluid transfer systems requiring flexible routing between fixed and movable components. The male rigid x male swivel configuration accommodates installations where one connection point is stationary and the other requires rotational alignment during makeup. Typical applications include refrigeration lines, hydraulic circuits, and industrial fluid transfer runs where neoprene construction provides resistance to heat, oil, and moderate chemical exposure. The 50-foot length suits runs requiring extended reach without field fabrication.

Key Features

• Rated to 3,000 psi working pressure for high-demand service
• Neoprene construction handles -40 degrees F to 250 degrees F operating range
• 3/8-inch inside diameter with 5/8-inch outside diameter
• Male rigid x male swivel fitting ends for flexible installation alignment
• 50-foot length delivered as a complete, pre-fitted assembly
• Black outer jacket for UV and abrasion resistance in exposed installations

Compatibility

Designed as an OEM-style replacement or new-install hose assembly for high-pressure fluid transfer systems requiring 3/8-inch male rigid x male swivel connections rated to 3,000 psi.

Installation Notes

Installation should be performed by a qualified technician familiar with high-pressure fluid systems. De-pressurize and isolate the system completely before disconnecting any existing lines or making new connections. The male swivel fitting should be hand-tightened before applying a wrench to avoid cross-threading; do not over-torque. Route the hose to avoid sharp bends, contact with hot surfaces above the rated temperature, or abrasion points that could compromise the outer jacket over time.