Parker 7212-750RD Push-on Air Hose 3/4 in 300 Psi Red

Product Description

The PARKER 7212-750RD is a push-on air hose designed for compressed air service in industrial and trade applications. It features a 3/4 inch inside diameter and a 1-1/32 inch outside diameter, with a 300 psi working pressure rating. The hose is constructed from Buna-N nitrile rubber, which provides resistance to oil, abrasion, and wear. It operates across a temperature range of -40 degrees F to 212 degrees F, making it suitable for demanding shop and field environments. This hose is sold in cut-to-length increments and is installed by mechanical contractors, industrial maintenance technicians, and plumbing professionals.

This hose is well suited for air tool supply lines, compressor drops, and general compressed air distribution in shops, manufacturing facilities, and job sites. The push-on design eliminates the need for clamps or ferrules at compatible fittings, speeding up assembly and reducing hardware costs. The red color aids in quick visual identification of air lines in multi-hose installations. A 25-foot minimum cut length applies, with the full coil measuring 400 feet. It also carries a vacuum rating of 15 inHg, allowing use in light vacuum service where required.

Key Features

• Push-on design for clamp-free, tool-free hose attachment at compatible fittings
• 300 psi working pressure for standard compressed air service
• Buna-N nitrile rubber construction resists oil, abrasion, and wear
• Wide temperature range of -40 degrees F to 212 degrees F
• 15 inHg vacuum rating supports light vacuum service applications
• Red color for easy air line identification in multi-hose setups

Compatibility

Designed for use with push-on style air fittings sized for 3/4 inch ID hose. No end connections are included; compatible fittings must be sourced separately based on the specific push-on standard used at the installation site.

Installation Notes

Installation should be performed by a qualified mechanical or industrial maintenance technician. Depressurize the air system completely before cutting or connecting the hose. Use a clean, square cut to ensure a proper seal at push-on fittings. Verify that the system working pressure does not exceed the 300 psi rating of this hose and that ambient and fluid temperatures remain within the rated range.