Parker 71315SN2SNJ1 Solenoid Valve 1/4 in Port Nc

Product Description

The PARKER 71315SN2SNJ1 is a normally closed solenoid valve body designed for fluid control applications in HVAC, refrigeration, and industrial process systems. The valve body is constructed from stainless steel with an NBR seal, making it suitable for use with a range of compatible media where corrosion resistance is required. The unactuated state is closed, meaning flow is blocked until the coil is energized. This valve body has a port size of 1/4 inch, an orifice size of 3/16 inch, and an orifice sleeve size of 3/32 inch. A Cv factor of 0.38 describes the flow capacity through the valve. An integrated coil is required for complete valve operation and must be sourced separately. This part is typically installed by HVAC technicians, refrigeration mechanics, or licensed plumbers.

This solenoid valve body fits applications where precise, electrically actuated fluid shutoff is needed. The stainless steel body suits environments where moisture, mild chemicals, or process fluids are present. The NBR seal is compatible with a range of common refrigerants, water, and light oils. With a minimum operating pressure differential of 0 psi, this valve can open or close even under zero differential pressure conditions. The maximum operating temperature is 185 degrees F. Typical installations include refrigerant liquid lines, water supply circuits, and process control piping in both commercial and light industrial settings.

Key Features

• Normally closed (NC) unactuated state — flow blocked until coil is energized
• Stainless steel body for corrosion resistance in demanding service environments
• NBR seal material compatible with common refrigerants, water, and light oils
• 1/4 inch port size with a Cv factor of 0.38 for precise flow control
• Minimum operating pressure differential of 0 psi — functions under zero differential conditions
• Requires a separately sourced integrated coil for complete, functional valve assembly

Compatibility

Designed as an OEM-style solenoid valve body for use in refrigeration, HVAC, and fluid control systems requiring a 1/4 inch normally closed valve with stainless steel construction. A compatible integrated coil must be paired with this valve body for complete operation.

Installation Notes

Installation should be performed by a licensed HVAC technician, refrigeration mechanic, or plumber in accordance with applicable local codes. De-energize all electrical systems and isolate and relieve pressure from the associated fluid circuit before beginning service or installation. Verify coil voltage and connection requirements match the integrated coil selected for use with this valve body. Do not overtighten port fittings — follow the fitting manufacturer and applicable piping code guidelines for proper torque.