Parker 71315SN2SN00 Solenoid Valve 1/4 Inch Npt

Product Description

The PARKER 71315SN2SN00 is a direct-acting, normally closed solenoid valve designed for precise fluid control in industrial and mechanical systems. The valve features a 1/4 inch NPT port, a stainless steel body, and an NBR seal, making it suitable for demanding environments where corrosion resistance and reliable shutoff are required. It accepts a wide range of supply voltages including 12 Vdc, 24 Vdc, 24/60 Vac, 120 Vdc, 120/60 to 110/50 Vac, and 240/60 to 220/50 Vac. The integrated coil is included. Licensed mechanical and industrial service technicians typically specify and install this valve in process piping, refrigeration, and fluid-handling applications.

This valve is suited for use in light industrial, commercial HVAC, refrigeration, and process control systems where a normally closed, direct-acting solenoid valve with a compact footprint is required. The 3/16 inch orifice and a Cv factor of 0.38 make it appropriate for low-flow applications. A minimum operating pressure differential of 0 psi means the valve will open and close fully even under no-flow or zero-differential conditions, expanding its range of compatible system configurations.

Key Features

• Direct-acting design operates at zero minimum pressure differential — no system pressure required to actuate
• Normally closed (NC) unactuated state provides failsafe shutoff when power is removed
• Stainless steel body with NBR seal for corrosion resistance and broad fluid compatibility
• Multi-voltage coil supports 12 Vdc, 24 Vdc, 24/60 Vac, 120 Vdc, 120/60 to 110/50 Vac, and 240/60 to 220/50 Vac
• Integrated coil included — no separate coil purchase required for initial assembly
• Compact overall dimensions: 3.82 inches height, 2.76 inches length

Compatibility

Designed as an OEM-style direct-acting normally closed solenoid valve for use in industrial, HVAC, refrigeration, and process fluid-control systems requiring a 1/4 inch NPT port and multi-voltage operation.

Installation Notes

Installation should be performed by a qualified technician familiar with the applicable fluid system — de-energize the circuit and isolate upstream pressure before servicing. NPT threaded connections require appropriate thread sealant applied per local plumbing or mechanical codes. Verify supply voltage matches one of the rated coil voltages before energizing. Note that the manufacturer specifies this valve requires an integrated coil for a complete, functional assembly — confirm the coil is properly seated and secured prior to commissioning.