Parker 71315SN2MN00 Solenoid Valve 1/4 Inch Npt

Product Description

The PARKER 71315SN2MN00 is a direct-acting, normally closed solenoid valve designed for precise fluid control in industrial, HVAC, and process piping applications. It features a 1/4 inch NPT port, a stainless steel body, and an NBR seal, making it suitable for a wide range of compatible media and environments. The valve supports multiple voltage configurations including 12 Vdc, 24 Vdc, 24/60 Vac, 120 Vdc, 120/60 to 110/50 Vac, and 240/60 to 220/50 Vac, allowing integration into diverse control systems. An integrated coil is required for complete valve operation. Licensed plumbers, pipefitters, and HVAC technicians are the typical installers of this type of component.

This valve is suited for residential and commercial piping systems where direct-acting solenoid control is required. Its normally closed unactuated state means the valve remains shut when de-energized, which is standard for safety-critical and fail-safe flow control scenarios. The 0 psi minimum operating pressure differential allows it to function under low or no-pressure-differential conditions, expanding its range of viable applications. Compatible voltage flexibility makes it adaptable to both North American and international electrical supply configurations.

Key Features

• Direct-acting design operates at 0 minimum pressure differential, no upstream pressure required
• Stainless steel body provides corrosion resistance for demanding service environments
• NBR seal material compatible with a broad range of fluid media
• Multi-voltage compatibility: 12 Vdc, 24 Vdc, 24/60 Vac, 120 Vdc, 120/60 to 110/50 Vac, 240/60 to 220/50 Vac
• Normally closed unactuated state supports fail-safe system designs
• Cv factor of 0.23 and 1/8 inch orifice sized for controlled low-flow applications

Compatibility

Designed as a direct-acting normally closed solenoid valve replacement or new installation component for systems requiring a 1/4 inch NPT port connection. Requires a compatible integrated coil for complete valve assembly and operation.

Installation Notes

Installation should be performed by a licensed plumber, pipefitter, or qualified HVAC technician in accordance with applicable local codes and the IFGC or IPC as relevant. Shut off system pressure and de-energize all electrical circuits before beginning installation or service. Confirm coil voltage matches the available supply before energizing. Do not exceed the 90 psi maximum working pressure or the 185 degrees F maximum temperature rating during operation.