Parker 71315SN2EN00 Solenoid Valve 1/4 Inch Port

Product Description

The PARKER 71315SN2EN00 is a normally closed solenoid valve designed for precise fluid control in demanding industrial and mechanical systems. The valve body is constructed from stainless steel, making it suitable for applications where corrosion resistance is required. The NBR seal provides reliable performance across a broad range of compatible media. This valve ships without an integrated coil — a separately sourced integrated coil is required to complete the valve assembly. Installation is performed by licensed HVAC technicians, plumbers, or industrial mechanics depending on the application.

This solenoid valve is suited for use in refrigeration, pneumatic, hydraulic, and fluid-handling systems where a 1/4 inch port, normally closed configuration is needed. The minimum operating pressure differential of 0 psi allows the valve to open under zero differential pressure, making it compatible with low-pressure and gravity-fed system designs. Typical install scenarios include process control lines, refrigerant circuits, and chemical-resistant fluid systems requiring stainless steel wetted components.

Key Features

• Normally closed valve state — de-energized position blocks flow for fail-safe system design
• Stainless steel body construction for corrosion resistance in aggressive media environments
• NBR seal material compatible with a wide range of oils, fuels, and refrigerants
• Minimum operating pressure differential of 0 psi — operates in zero-differential and gravity-fed systems
• Cv factor of 0.0600 and 3/64 inch orifice size for low-flow, precision control applications
• Requires a separately sourced integrated coil to complete the valve assembly

Compatibility

Designed as an OEM-style solenoid valve body for refrigeration, pneumatic, and fluid-handling systems requiring a 1/4 inch port, normally closed configuration. A compatible integrated coil must be sourced separately to complete the assembly.

Installation Notes

Installation should be performed by a qualified HVAC technician, plumber, or industrial mechanic in accordance with applicable codes and system design requirements. Shut off all fluid supply and depressurize the system completely before removing or installing the valve. Do not energize the valve until the integrated coil is fully installed and all connections are secure. Verify media and temperature compatibility with both the stainless steel body and NBR seal prior to commissioning.