Parker 6382 60 56WP2 Push-to-connect Plug 3/8x1/4 in

Product Description

The PARKER 6382 60 56WP2 is a push-to-connect tube plug fitting designed to seal off open tube ends in pneumatic and fluid-handling lines. Constructed from polymer, this plug accepts tubing with a 3/8 inch and 1/4 inch outside diameter and is rated to 230 psi. The push-to-connect design allows for tool-free installation and quick line termination without threading or soldering. This fitting is a compact, single-piece solution suited for HVAC, refrigeration, pneumatic control, and plumbing applications where a capped or plugged line end is required.

This plug fitting is used to terminate unused ports or seal tube ends in low-to-medium pressure systems. It is appropriate for residential and light commercial installations involving pneumatic controls, HVAC accessories, or water treatment lines. The polymer construction makes it suitable for use in environments where corrosion resistance is important. HVAC technicians, plumbers, and pneumatic system installers will encounter this fitting in control line assemblies, instrumentation tubing, and similar applications.

Key Features

• Push-to-connect design allows tool-free installation and removal
• Rated to 230 psi for reliable low-to-medium pressure sealing
• Polymer construction resists corrosion in wet or chemical-adjacent environments
• Compact footprint: 1.26 inches height, 1.26 inches length, 0.63 inches width
• Seals 3/8 inch and 1/4 inch OD tubing in a single fitting
• Sold as a single unit with no minimum order requirement beyond one piece

Compatibility

Designed as an OEM-style push-to-connect plug for pneumatic, HVAC control, and fluid-handling tube lines using 3/8 inch and 1/4 inch outside diameter tubing.

Installation Notes

Installation is performed by inserting the tubing into the fitting until it seats fully against the internal collet. Before servicing any pressurized line, depressurize the system completely and, for HVAC applications, de-energize all related electrical circuits. Ensure tubing ends are cut cleanly and squarely with no burrs or debris before insertion. Follow applicable codes including IFGC or IPC as required for the system type being serviced.