Parker 601-8 Hydraulic Hose 1000 Psi 1/2 Inch Id Sae 100R3

Product Description

The PARKER 601-8 is a flexible hydraulic hose built for medium-pressure fluid transfer in industrial and mobile hydraulic systems. Constructed from synthetic rubber, this hose carries a 1,000 psi working pressure rating and an inside diameter of 0.5 inches, placing it in the SAE 100R3 specification class. The hose size designation is -8, which corresponds to a nominal 1/2-inch ID. It is sold in 1-foot increments from a 250-foot coil, with a 20-foot minimum cut length per order. Licensed hydraulic technicians and fluid power mechanics are the primary installers of this product.

The PARKER 601-8 is suited for low-to-medium pressure hydraulic return lines, suction lines, and fluid transfer applications in both stationary and mobile equipment. Its operating temperature range of -40 degrees F to 257 degrees F makes it appropriate for a wide range of ambient and fluid temperature environments. The 5-inch minimum bend radius guides routing in tight equipment compartments. Typical applications include agricultural machinery, construction equipment, and industrial hydraulic power units where a flexible, rubber-bodied hose is required.

Key Features

• SAE 100R3 rated construction for medium-pressure hydraulic service
• 1,000 psi working pressure capacity
• Synthetic rubber body handles a temperature range of -40 degrees F to 257 degrees F
• 5-inch minimum bend radius for routing in confined spaces
• Sold in 1-foot cut increments from a 250-foot coil; 20-foot minimum cut length applies
• Black outer jacket; Series 601 construction

Compatibility

Designed as an OEM-style replacement or new-installation hose for hydraulic systems requiring SAE 100R3 rated flexible hose with a -8 (1/2 inch ID) size designation.

Installation Notes

Installation should be performed by a qualified hydraulic technician or fluid power mechanic. Depressurize and lock out the hydraulic system completely before cutting, fitting, or replacing any hose segment. Observe the 5-inch minimum bend radius during routing to prevent internal reinforcement damage and premature failure. Confirm all end fittings are rated for the system working pressure before returning the circuit to service.