Parker 23R10 Cartridge Filter 5 Micron 10 Inch Cotton

Product Description

The PARKER 23R10 is a string-wound cartridge filter designed for plumbing and water treatment applications. It measures 2.5 inches in outside diameter and 10 inches in length, with a 5-micron filtration rating that captures sediment, sand, rust, and particulate from water supply lines. The filter body is wound cotton construction with an FDA-grade material rating, making it suitable for potable water systems. A tinned steel core provides structural rigidity under flow pressure. Plumbers and water treatment technicians install this filter in standard filter housings as part of point-of-entry or point-of-use filtration setups.

This cartridge filter is used in residential and light commercial water filtration systems where sediment removal is required upstream of fixtures, appliances, or more sensitive filtration stages. The 5-micron rating is a common first-stage or whole-house sediment rating, effective against coarse to medium particulate. The cotton string-wound design allows for depth filtration, trapping particles throughout the media rather than only on the surface. Maximum working temperature is rated to 250 degrees F, which supports a range of hot and cold water line applications.

Key Features

• 5-micron filtration rating for sediment, sand, and rust removal
• String-wound cotton media provides depth filtration performance
• Tinned steel core adds structural stability under water pressure
• FDA-grade material rating suitable for potable water applications
• Rated to 250 degrees F maximum working temperature
• Standard 2.5-inch OD fits most common residential filter housings

Compatibility

Designed as an OEM-style replacement sediment cartridge for standard 10-inch filter housings with a 2.5-inch inner diameter, commonly used in residential and light commercial point-of-entry and point-of-use water filtration systems.

Installation Notes

Installation is performed by licensed plumbers or qualified water treatment technicians. Shut off the water supply and relieve line pressure before opening the filter housing. Follow IPC guidelines for potable water component installation and verify the housing O-ring is seated and in good condition before reassembling. Do not exceed the rated maximum working temperature or pressure specified for the filter housing.