Parker 2.50NLPE92.00 Air Cylinder 2.5in Bore 2in Stroke

Product Description

The PARKER 2.50NLPE92.00 is a single-acting rodless air cylinder designed for linear pneumatic motion control in industrial and automated equipment applications. With a 2.5-inch bore and a 2-inch stroke, it delivers controlled single-direction actuation using compressed air, with spring or gravity return. The cylinder body is constructed from steel and aluminum, keeping weight low at 1.34 pounds while maintaining structural integrity under working loads. The 1/4 NPT port allows straightforward connection to standard pneumatic fittings. Nitrile butadiene rubber (NBR) seals provide reliable air retention across typical operating temperature ranges. Licensed HVAC, mechanical, and industrial maintenance technicians commonly install and service this type of pneumatic component.

This cylinder is suited for light- to medium-duty single-acting pneumatic circuits where a compact stroke length is required. The 2.5-inch bore size provides a moderate force output appropriate for actuating valves, dampers, clamps, and similar mechanisms in automated or process-control systems. The head or cap mounting style gives installers flexibility in how the cylinder is oriented and fixed within an equipment frame or panel assembly. At 6.234 inches in overall length, it fits into space-constrained installations without significant modification to existing hardware.

Key Features

• Single-acting design with 2.5-inch bore for moderate pneumatic force output
• 2-inch stroke length suited for compact actuation requirements
• 1/4 NPT port for direct connection to standard pneumatic lines
• Steel and aluminum body construction balances strength and weight
• NBR seals provide durable air-tight performance across operating conditions
• Head or cap mounting style for flexible installation orientation
• Female rod thread size of 1/2-20 for standard end-fitting connections

Compatibility

Designed as an OEM-style replacement or direct-fit pneumatic cylinder for single-acting rodless cylinder applications requiring a 2.5-inch bore, 2-inch stroke, and 1/4 NPT port with head or cap mounting.

Installation Notes

Installation should be performed by a qualified mechanical or industrial maintenance technician familiar with pneumatic systems. Depressurize and isolate the pneumatic circuit completely before removing or installing the cylinder. Verify port connections are properly sealed with compatible thread sealant rated for compressed air service, and confirm mounting hardware is torqued to equipment manufacturer specifications. Follow applicable OSHA lockout/tagout procedures when working on automated or powered equipment.