Parker 2.50DXPSRM02.00 Rodless Air Cylinder 2.5in Bore 250psi

Product Description

The PARKER 2.50DXPSRM02.00 is a double acting rodless air cylinder designed for linear motion applications in pneumatic systems. With a 2.5 inch bore and 2 inch stroke, it delivers controlled bidirectional actuation using compressed air. The stainless steel body withstands demanding industrial environments, and the cylinder is rated to a maximum working pressure of 250 psi. Nitrile butadiene rubber (NBR) seals provide reliable performance across a wide range of operating conditions. The 1/4 inch NPTF port accepts standard pneumatic fittings, and the 1/2-20 male rod thread allows direct coupling to tooling or load attachments. Licensed pneumatic system technicians and industrial maintenance mechanics are the primary installers.

This cylinder suits light-to-medium duty linear actuation in manufacturing, automation, and material handling equipment. The double end or rear pivot mounting style allows flexible integration into machine frames and fixture assemblies where inline or pivoting motion is required. The 2.62 inch overall width and 8.94 inch length keep the envelope compact for tight installation spaces. Applications include actuating gates, clamps, positioning slides, and similar mechanisms in both OEM machine builds and field service replacements.

Key Features

• Double acting operation for powered extension and retraction strokes
• Stainless steel body construction for corrosion resistance in wash-down or humid environments
• NBR seals rated for standard pneumatic service with air or inert gas media
• 250 psi maximum working pressure supports a broad range of industrial supply pressures
• 1/4 inch NPTF port compatible with standard pneumatic fittings and manifolds
• Double end or rear pivot mounting provides installation flexibility for inline or articulating loads

Compatibility

Designed as an OEM-style replacement or new-build component for pneumatic linear motion systems requiring a 2.5 inch bore rodless cylinder with double end or rear pivot mounting and NPTF porting.

Installation Notes

Installation should be performed by a qualified pneumatic systems technician. Depressurize and isolate the pneumatic supply line completely before removing or installing any cylinder. Verify that the supply pressure does not exceed 250 psi and that the port fittings are rated for the system operating pressure. Secure all mounting hardware firmly before pressurizing the system and cycling the actuator to confirm alignment and travel.