Parker 2.50DSRM08.00 Rodless Air Cylinder 2.5in Bore 8in Stroke

Product Description

The PARKER 2.50DSRM08.00 is a double acting rodless air cylinder designed for linear motion applications in pneumatic systems. It features a 2.5-inch bore and an 8-inch stroke, delivering controlled bidirectional force with a maximum working pressure of 250 psi. The body is constructed from stainless steel, making it suitable for environments where corrosion resistance and durability are required. The cylinder ships with a rod diameter of 0.625 inches and uses nitrile butadiene rubber (NBR) seals. Licensed HVAC, mechanical, and industrial technicians commonly install this type of pneumatic actuator in automated equipment, process controls, and material handling systems.

This cylinder is suited for light-to-medium industrial and commercial pneumatic applications where a compact rodless design is preferred over a traditional rod-style actuator. The front nose mount style allows for straightforward panel or bracket mounting, and the 1/4 NPTF port connects directly to standard pneumatic supply lines. The overall assembly width is 2.62 inches and the overall length is 13.57 inches, fitting space-constrained installations. The male rod thread size is 1/2-20 for tooling or attachment connections.

Key Features

• Double acting operation for bidirectional force in both extend and retract directions
• 2.5-inch bore with 8-inch stroke for moderate force and travel range
• Stainless steel body construction for corrosion resistance in demanding environments
• NBR seals rated for compatibility with standard pneumatic system lubricants
• 1/4 NPTF port for direct connection to common pneumatic supply fittings
• Front nose mount design for panel or bracket installation

Compatibility

Designed as an OEM-style replacement or direct-fit pneumatic cylinder for industrial and commercial pneumatic systems requiring a double acting rodless actuator with a 2.5-inch bore and front nose mount configuration.

Installation Notes

Installation should be performed by a qualified pneumatic or mechanical technician. Depressurize and lock out the pneumatic supply line before removing or installing any cylinder. Ensure port fittings are rated for 250 psi and that thread sealant compatible with NPTF connections is applied properly. Verify that the mounting bracket and hardware are rated for the cylinder's operating load before returning the system to service.