Parker 2.00TEF4MAU14A08.00 Rodless Air Cylinder 2in Bore

Product Description

The PARKER 2.00TEF4MAU14A08.00 is a double acting rodless air cylinder designed for linear motion applications in industrial pneumatic systems. With a 2 inch bore and an 8 inch stroke, it delivers consistent force in both extend and retract directions using compressed air. The cylinder body is constructed from aluminum, keeping weight manageable at 5.2 pounds while maintaining structural durability. A maximum working pressure rating of 250 psi gives it a reliable operating envelope for most plant-air and machine-automation circuits. The 3/8 NPTF port accepts standard pneumatic fittings without thread sealant complications. Millwrights, maintenance technicians, and pneumatic system integrators are the primary installers of this component.

This cylinder fits into automated machinery, material handling equipment, pick-and-place fixtures, and other industrial applications that require guided linear travel without a conventional protruding rod. The basic mount style allows direct attachment to machine frames or custom brackets. With an overall length of 11.625 inches and an overall width of 2.5 inches, it suits space-constrained installations where a traditional rod cylinder would interfere with adjacent components. The rodless design keeps the total machine envelope compact across the full stroke range.

Key Features

• Double acting operation provides powered force in both directions of travel
• 2 inch bore with 8 inch stroke delivers consistent linear output
• Aluminum body construction reduces overall assembly weight
• 3/8 NPTF port is compatible with standard threaded pneumatic fittings
• Nitrile butadiene rubber seals resist typical industrial air circuit contaminants
• Basic mount style accommodates direct frame or bracket attachment
• Female rod thread size of 7/16-20 for end load attachment

Compatibility

Designed as an OEM-style replacement or direct-install double acting rodless pneumatic cylinder for industrial machinery requiring a 2 inch bore, 8 inch stroke, basic mount configuration with 3/8 NPTF porting.

Installation Notes

Installation should be performed by a qualified millwright or pneumatic systems technician. Depressurize and lock out the air supply before removing an existing cylinder or installing this unit. Verify that supply air is clean, dry, and lubricated per the system design before pressurizing. Do not exceed the 250 psi maximum working pressure rating under any operating or surge condition.