Parker 1.50TEF4MAU14A04.00 Rodless Air Cylinder 250 Psi

Product Description

The PARKER 1.50TEF4MAU14A04.00 is a double acting rodless air cylinder designed for linear motion applications in pneumatic systems. It features a 1-1/2 inch bore and a 4 inch stroke, with a maximum working pressure of 250 psi. The aluminum body keeps weight low while maintaining structural rigidity. Porting is 3/8 NPTF, and the rod thread is 7/16-20 female style. A nitrile butadiene rubber (NBR) seal package provides reliable performance across typical industrial temperature ranges. Licensed HVAC, mechanical, and industrial automation technicians install this cylinder in pneumatically actuated assemblies requiring compact, rod-free linear travel.

This cylinder is suited for industrial automation, material handling, and mechanical actuation systems where a traditional rod-style cylinder would create interference or require excessive clearance. The basic mount style allows for straightforward panel or bracket installation. With a 7-5/8 inch overall length and 2 inch overall width, it fits into space-constrained pneumatic circuits in both light industrial and commercial equipment. The 5/8 inch rod diameter and 4 inch stroke make it appropriate for moderate-force, short-travel actuation tasks.

Key Features

• Double acting design provides powered motion in both extend and retract directions
• 1-1/2 inch bore with 4 inch stroke for moderate-force linear actuation
• 250 psi maximum working pressure for compatibility with standard shop air systems
• 3/8 NPTF port for leak-resistant threaded connections without sealant tape on every cycle
• Aluminum body construction reduces overall assembly weight
• Nitrile butadiene rubber seals provide resistance to common lubricants and pneumatic fluids
• Basic mount style simplifies panel or bracket installation

Compatibility

Designed as an OEM-style replacement or direct-fit component for pneumatic actuator assemblies requiring a double acting rodless cylinder with a 1-1/2 inch bore and basic mount configuration.

Installation Notes

Installation should be performed by a qualified pneumatic or mechanical technician. Depressurize and lock out the pneumatic supply line before servicing or installing the cylinder. Ensure port connections are made with properly rated NPTF fittings and that the air supply does not exceed 250 psi. Align the cylinder carefully during mounting to avoid side-loading the rod, which can accelerate seal wear.