Parker 1.00NSU1605.00 Rodless Air Cylinder 1 in Bore 5 in Stroke

Product Description

The PARKER 1.00NSU1605.00 is a double acting rodless air cylinder designed for linear motion control in pneumatic systems. It features a 1 inch bore, a 5 inch stroke, and a maximum working pressure of 200 psi. The cylinder body is constructed from steel and aluminum, keeping weight low at 1.4 pounds while maintaining structural durability. A 1/8 NPTF port allows for standard pneumatic fittings. This cylinder is installed by industrial maintenance technicians and pneumatic system integrators working on automation, positioning, and actuator applications where a compact, rod-free linear actuator is required.

This cylinder suits light-duty industrial and automation applications where space constraints make traditional rod-style cylinders impractical. The nose mount configuration allows direct attachment to a panel or bulkhead, simplifying installation in machine frames and fixture assemblies. Its double acting design enables controlled force in both extend and retract directions, making it suitable for positioning, clamping, and transfer tasks in production and process equipment.

Key Features

• Double acting operation provides powered force in both directions of travel
• 1 inch bore with 5 inch stroke for compact linear motion range
• 200 psi maximum working pressure for light-to-medium duty pneumatic circuits
• 1/8 NPTF port accepts standard pneumatic fittings without sealant-free thread mating concerns
• Nose mount style enables direct panel or bulkhead mounting
• Steel and aluminum body construction balances strength and weight
• Nitrile butadiene rubber (NBR) seals provide reliable performance with standard shop air

Compatibility

Designed as an OEM-style replacement or direct-fit rodless air cylinder for pneumatic automation systems requiring a 1 inch bore, 5 inch stroke, nose mount configuration with 1/8 NPTF porting.

Installation Notes

Installation should be performed by a qualified pneumatic or mechanical technician. Depressurize and lock out the pneumatic supply before removing or installing the cylinder. Ensure port fittings are rated for the system operating pressure and that the mounting surface can support the cylinder load and reaction forces. Follow applicable OSHA lockout/tagout procedures and any relevant machine safety standards during installation and commissioning.