Panduit pn14-8ff-c Flanged Fork Terminal 18-14 Awg 100 Pack

Product Description

The PANDUIT pn14-8ff-c is a nylon-insulated, flanged fork terminal designed for securing 18 AWG to 14 AWG conductors to a No. 8 stud. The funnel-entry barrel guides wire insertion cleanly during termination, reducing installation errors in high-volume wiring work. The electrolytic tin-plated copper body with a brazed seam barrel delivers a reliable, low-resistance mechanical connection rated to 600 volts and 221 degrees F. The blue color coding identifies the 16-14 AWG range at a glance on the bench or in the panel. Sold in a standard pack of 100, this terminal is a staple for panel builders, electricians, and controls technicians working with small-gauge conductors.

This terminal is suited for residential and commercial electrical panel wiring, control panels, HVAC equipment wiring harnesses, and low-voltage control circuit terminations. The flanged fork design allows the terminal to remain on the stud when a fastener is loosened, which simplifies field service and reconnection work. It is appropriate for any application requiring a secure, code-compliant ring-style alternative where stud removal is impractical.

Key Features

• Flanged fork with funnel-entry barrel guides wire for fast, consistent terminations
• Electrolytic tin-plated copper body with brazed seam barrel for low-resistance connections
• Nylon insulation rated to 221 degrees F and 600 volts
• Blue color coding identifies 18-14 AWG conductor range at a glance
• RoHS compliant construction
• UL 486A/486B and CSA C22.2 listed for use in listed equipment
• Pack of 100 for production or service inventory

Compatibility

Designed for use with 18 AWG to 14 AWG copper conductors terminating to a No. 8 stud. Suitable for control panels, terminal blocks, and equipment mounting points accepting a No. 8 fastener.

Installation Notes

Installation is performed by licensed electricians or qualified controls technicians. De-energize and lock out the circuit before terminating or removing any connector. Strip conductors to the manufacturer-recommended strip length and seat the wire fully into the funnel-entry barrel before crimping with a ratcheting crimp tool appropriate for insulated fork terminals. Verify torque on the mounting stud per the equipment manufacturer or applicable NEC guidelines after seating the terminal.