Panduit PLT4S-C186 Standard Cable Tie 14.4in Blue

Product Description

The PANDUIT PLT4S-C186 is a standard-duty cable tie made from blue polypropylene, designed for bundling and securing wire and cable runs in electrical, data, and light industrial applications. At 14.4 inches in overall length with a 0.19-inch width and a 30 lb tensile strength, this tie handles moderate-load bundling tasks reliably. The blue color supports color-coded cable management systems, making it easy to identify circuits or cable groups at a glance. Licensed electricians, low-voltage installers, and panel builders are the primary installers of this hardware.

This cable tie suits residential and commercial electrical installations, control panel wiring, telecommunications closets, and general wire management in conduit or tray systems. The polypropylene construction provides good resistance across a wide operating temperature range, from -76 degrees F to 239 degrees F, making it viable in both climate-controlled and non-conditioned spaces. A maximum bundle diameter of 4 inches accommodates large wire harnesses common in panel work and industrial enclosures. Sold in multiples of 100 per order.

Key Features

• 30 lb tensile strength for reliable, moderate-duty wire bundling
• 14.4-inch length accommodates a maximum bundle diameter of 4 inches
• Blue color supports color-coded cable identification and circuit organization
• Polypropylene construction rated from -76 degrees F to 239 degrees F
• 0.057-inch thickness with a 0.19-inch width for a low-profile, secure cinch
• RoHS compliant for use in environmentally regulated installations

Compatibility

Designed as a standard-style cable tie for general wire and cable bundling applications in electrical, data, and light industrial installations where a 14.4-inch polypropylene tie with a 4-inch maximum bundle capacity is appropriate.

Installation Notes

Cable ties of this type are installed by electricians, low-voltage technicians, and panel builders using manual or pneumatic tie tools. De-energize circuits before working inside panels or enclosures, following NFPA 70E arc-flash and lockout-tagout procedures. Trim the tail flush after cinching to avoid sharp edges that can damage adjacent wire insulation. Do not exceed the rated 30 lb tensile strength by over-cinching or using the tie as a structural support.