Panduit PLT4H-L Standard Cable Tie 14.5in Natural Nylon

Product Description

The PANDUIT PLT4H-L is a standard nylon cable tie designed for bundling and securing wire harnesses, cable runs, and conduit assemblies in electrical and low-voltage installations. At 14.5 inches in overall length with a tensile strength of 120 pounds, this tie handles medium-to-heavy bundle loads without specialized tooling. The natural (translucent) color suits indoor applications where UV resistance is not a primary concern. Rated for operating temperatures from -76 degrees F to 185 degrees F, the PLT4H-L maintains holding force across a wide service range. Electricians, datacom installers, and panel builders reach for this tie when a reliable, UL-listed fastener is required on commercial and residential work.

This cable tie is suited for routing and securing cable bundles in electrical panels, junction boxes, wire trays, and equipment enclosures. It accepts bundle diameters up to 4 inches, making it useful for consolidating larger wire groups on commercial electrical projects, HVAC control wiring, and structured cabling runs. The natural nylon construction is appropriate for dry, indoor environments. It is sold in multiples of 50 units per order.

Key Features

• 14.5-inch overall length accommodates a wide range of bundle sizes up to 4 inches in diameter
• 120-pound tensile strength provides reliable holding force for medium-to-heavy cable bundles
• Natural nylon material is flexible and easy to install by hand or with a tensioning tool
• Operating temperature range of -76 degrees F to 185 degrees F suits most indoor service environments
• UL 62275 Compliant Type 1 and Type 11; UL Listed and UL Recognized under File E56854

Compatibility

Designed as a standard-duty, OEM-style nylon cable tie suitable for general electrical, low-voltage, and panel wiring applications where a 14.5-inch, 120-pound-rated fastener is specified.

Installation Notes

Cable ties of this type are installed by electricians and low-voltage technicians following NEC bundling and support requirements. Power down or de-energize circuits before working inside panels or enclosures. Feed the tie tail through the locking head, cinch to the desired tension, and trim the tail flush using diagonal cutters or a dedicated cable-tie gun. Avoid over-tensioning on insulated conductors, which can deform jacket material.