Panduit HSTTVA75-48-5 Adhesive-lined Heat Shrink Tubing

Product Description

The PANDUIT HSTTVA75-48-5 is an adhesive-lined heat shrink tubing designed for electrical wire and cable insulation, strain relief, and environmental sealing. The thin-wall construction allows for a lower profile installation while the interior adhesive layer melts during shrinkage to create a moisture-resistant, mechanically secure bond around the substrate. This type of tubing is a standard consumable for electricians and low-voltage technicians working on harness builds, field repairs, and wire termination protection.

Adhesive-lined heat shrink tubing is used across residential, commercial, and industrial electrical applications wherever a durable, sealed sleeve is needed over wire splices, terminals, connectors, or cable jacket repairs. The thin-wall profile makes it well suited for tight conduit runs and bundled harness assemblies where bulk is a concern. It is commonly installed by licensed electricians, panel technicians, and instrumentation techs during new installation and maintenance service work.

Key Features

• Adhesive inner lining bonds to substrate during heat application for a sealed, moisture-resistant finish
• Thin-wall construction reduces overall diameter after shrink compared to standard-wall variants
• Suitable for wire insulation, strain relief, and environmental protection at terminations and splices
• Sold individually as a single-piece unit (EA, QTY 1)

Compatibility

Designed as a standard replacement and repair consumable for electrical wire and cable applications requiring adhesive-lined heat shrink sleeving. No specific compatible model numbers or system families were provided in the product data.

Installation Notes

Installation is performed by electricians or low-voltage technicians using a heat gun set to the appropriate shrink temperature for the tubing material. Always de-energize the circuit before applying heat shrink over any live conductor or termination. Slide the tubing into position before terminating the conductor where possible, as it cannot be applied after a connector is crimped in most cases. Follow applicable NEC guidelines for insulation ratings and wire protection requirements in the installation environment.