Panduit FZ2RPU1U1NNM002 OM4 Lc Uniboot Fiber Patch Cord

Product Description

The PANDUIT FZ2RPU1U1NNM002 is an OM4 multimode fiber optic patch cord built with a 2-fiber, 2mm round cable and LC Uniboot connectors. The Uniboot design combines both fibers into a single connector housing, reducing connector bulk at patch panels and switch ports. The cable jacket is rated OFNP, meaning it meets optical fiber nonconductive plenum requirements for installation in air-handling spaces. This patch cord is installed by licensed low-voltage technicians and network infrastructure specialists working on structured cabling systems in commercial and enterprise environments.

This patch cord is suited for OM4 multimode fiber runs in high-density data center environments, telecommunications rooms, and plenum-rated building spaces. The OFNP jacket rating makes it appropriate for horizontal and riser pathways where plenum-rated cabling is required by code. The LC Uniboot connector format is commonly used in high-density fiber distribution frames, active equipment patch fields, and spine-leaf network architectures where managing individual fiber strands is critical to maintaining airflow and cable organization.

Key Features

• OM4 multimode fiber supports high-bandwidth applications including 40G and 100G Ethernet over standard OM4 link distances
• LC Uniboot connector houses both fibers in a single plug body, cutting connector footprint at panel ports by approximately half compared to duplex LC
• OFNP-rated jacket meets plenum installation requirements per NEC Article 770 for use in air-handling spaces
• 2mm cable diameter reduces cable management bulk in high-density trays and panels
• Polished PC (Physical Contact) ferrule finish on LC connectors for low back-reflection and reliable signal transmission

Compatibility

Designed as an OEM-style patch cord for use with LC Uniboot-compatible fiber panels, transceivers, and active equipment in OM4 multimode structured cabling installations.

Installation Notes

Installation should be performed by a qualified low-voltage or fiber optic cabling technician familiar with TIA-568 structured cabling standards. Deactivate or power down connected active equipment and follow proper ESD precautions before handling fiber optic transceivers or connectors. Inspect ferrule end-faces with an appropriate fiber inspection tool before mating connectors, and never look directly into an active fiber port. Bend radius must be maintained at or above the cable minimum to avoid signal loss or physical damage to the fiber strand.