Panduit FZ2ERLNSNSNM030 OM4 Lc Duplex Fiber Patch Cable

Product Description

The PANDUIT FZ2ERLNSNSNM030 is an OM4 multimode duplex fiber optic patch cable designed for high-density data center and enterprise network environments. It features a 2-fiber, 1.6mm slim-round construction with LC duplex connectors on both ends and an OFNR-rated jacket, making it suitable for riser-rated indoor installations. The cable supports the bandwidth demands of 10G, 40G, and 100G transmission applications where low-loss, high-performance fiber connectivity is required. Licensed network technicians and structured cabling installers are the primary trade professionals who work with this product.

This patch cable is used in horizontal and backbone fiber runs within commercial buildings, data centers, and server rooms. The OFNR (Optical Fiber Nonconductive Riser) rating qualifies it for vertical runs between floors in riser pathways. The 1.6mm slim jacket reduces congestion in high-density patch panels and cable management systems. At 30 meters in length, it covers longer intra-building runs between network equipment, patch panels, and active hardware.

Key Features

• OM4 multimode fiber supports 10G, 40G, and 100G Ethernet applications
• Duplex LC connectors on both ends for standard SFP and SFP+ port compatibility
• 1.6mm slim-round jacket reduces cable bulk in high-density environments
• OFNR-rated jacket qualifies for riser-rated vertical indoor installations
• 30-meter length accommodates longer intra-building horizontal or riser runs
• 2-fiber construction supports full-duplex bidirectional transmission

Compatibility

Designed as an OEM-style replacement and standard patch cable for OM4 multimode fiber infrastructure using LC duplex connections in riser-rated indoor cabling systems.

Installation Notes

Installation should be performed by a qualified structured cabling technician or network installer familiar with TIA-568 fiber optic cabling standards. De-energize or power down connected active equipment before seating or removing fiber connectors to protect both the hardware and the fiber end-faces. Inspect and clean LC connector end-faces with an appropriate fiber optic cleaning tool before making connections. Avoid bending the cable beyond its minimum bend radius to prevent signal degradation or physical damage to the fiber.