Panduit FZ2ERLNLNSNM013 OM4 Duplex Lc Fiber Patch Cable

Product Description

The PANDUIT FZ2ERLNLNSNM013 is an OM4 multimode duplex fiber optic patch cable terminated with LC connectors on both ends. Built with a 1.6mm diameter cordage and an OFNR (Optical Fiber Nonconductive Riser) rated jacket, this cable is designed for high-bandwidth structured cabling installations in commercial and enterprise environments. The 2-fiber duplex configuration supports bidirectional data transmission over multimode OM4 glass, making it suitable for 10G, 40G, and 100G network backbone and horizontal runs. Network technicians and low-voltage cabling installers are the primary trades handling this product.

This patch cable is intended for use in riser-rated indoor environments such as data centers, server rooms, telecommunication closets, and multi-floor building backbones. The OFNR jacket rating meets National Electrical Code requirements for riser installations without the need for conduit in vertical runs. The LC duplex connector format is widely used in high-density fiber panels, switches, transceivers, and media converters. This cable ships as a single unit and is ready for direct installation without field termination.

Key Features

• OM4 multimode fiber supports 10G, 40G, and 100G transmission standards
• OFNR riser-rated jacket approved for vertical indoor runs per NEC Article 770
• Duplex 2-fiber construction enables full bidirectional data links
• 1.6mm cordage diameter suits high-density routing and bend-radius management
• LC duplex connectors on both ends for direct panel-to-switch or switch-to-server connections
• Factory-terminated and polished connectors eliminate field termination labor

Compatibility

Designed as an OEM-style replacement or direct-install duplex fiber patch cable for LC-equipped OM4 multimode fiber optic panels, switches, and transceivers in riser-rated commercial and enterprise structured cabling systems.

Installation Notes

Installation should be performed by a qualified low-voltage cabling technician or registered communications distribution designer familiar with NEC Article 770 requirements for optical fiber cables. Power down active port equipment before connecting or disconnecting fiber patch cables to avoid damage to transceivers. Observe the minimum bend radius of the cordage during routing and avoid sharp bends or kinking. Clean LC ferrules with an approved fiber optic cleaning tool before mating to maintain insertion loss performance.