Panduit FS2EPKJLNNJM004 OM4+ 2-fiber Lc Patch Cord

Product Description

The PANDUIT FS2EPKJLNNJM004 is a 2-fiber OM4+ multimode fiber optic patch cord designed for high-density structured cabling installations. Built with a 1.6mm diameter cable and OFNP (plenum-rated) jacket, it meets the demands of data center and commercial network environments where fire code compliance is required in air-handling spaces. The cord terminates in LC-style connectors and is factory-polished with a physical contact (PC) finish to minimize back reflection and insertion loss. Network technicians and low-voltage cabling contractors install this type of cord at patch panels, switches, and active equipment ports.

This patch cord is suited for OM4+ multimode fiber networks operating at 10G, 40G, and 100G speeds over short to medium distances in enterprise, data center, and commercial building cabling systems. The plenum OFNP jacket rating makes it appropriate for runs through air-handling plenums and drop ceilings without conduit where permitted by local code. LC connectors are standard in high-density panel and transceiver applications.

Key Features

• OM4+ multimode fiber grade supports high-bandwidth applications including 10G, 40G, and 100G Ethernet
• OFNP plenum-rated jacket meets NEC Article 770 requirements for air-handling spaces
• 1.6mm cable diameter suits high-density routing where bend radius and bulk are a concern
• Physical contact (PC) polish on LC connectors reduces back reflection at the mating interface
• 2-fiber duplex configuration supports standard full-duplex transceiver ports
• Factory-terminated and tested for consistent, repeatable performance at installation

Compatibility

Designed as an OEM-style replacement and standard-use patch cord for OM4+ multimode fiber cabling systems terminated with LC-style adapters and panels.

Installation Notes

Low-voltage cabling technicians and network infrastructure installers handle this type of patch cord. Before installation, power down or place in maintenance mode any active equipment ports being patched. Observe the manufacturer minimum bend radius for 1.6mm fiber cable to avoid signal degradation. Follow NEC Article 770 and local fire code requirements when routing OFNP-rated cordage through plenum spaces.